Series 214 Specifications
The 1" size series 214B valve is available as standard 2-way normally closed, normally open or hydraulic operated. The 214 offers a flow control handle for reducing the down stream flow. The valve can be plumbed in angle or straight through globe configuration. The 214 is a diaphragm type valve constructed of UV and chemical resistant PVC plastic.
Designed to operate at pressures from 20 - 150 psi. with an optimum flow range of 5 - 35 GPM. An external manual bleed is offered. The slow close feature prevents water hammer. Available seat seal elastomer is standard Buna-N (Nitrile).
Note: The solenoid coil is available in all listed voltages and solenoid types.
Materials
| Seals |
Nitrile |
| Internal Wetted |
Stainless Steel |
| Components |
(300 and 400 Series)
PVC and elastomer type |
| Port Size |
1" inch NPT
female, inlet
and outlet |
| Fluid Temperatures |
Maximum to 120°F |
Electrical
| Solenoid Voltage |
AC 50/60 Hz-12, 24, 120 or 240 volts DC-6, 12, or 24 volts Available in series 100 through 500 series solenoid
coil designs |
| Power Consumption |
AC-5 watts, DC-6 watts |
| Coil Construction |
Standard Class A (105°C)
Call for special needs |
 |
To Solenoid Main Page