Series 205T/205TF Specifications
The series 205 valves are available as standard 2-way normally closed, normally open or hydraulic operated. The 205TF is the same valve but offers the option of a flow control handle for reducing down stream flows. Both are diaphragm type valves constructed of chemical resistant PVC plastic. Designed to operate at pressures from 10-125 psi. with an optimum flow range of 3 to 35 GPM. An external manual bleed is offered. The slow close feature prevents water hammer. Available elastomers are standard Buna-n (Nitrile) with optional Fluoroelastomer (Viton).
Note: The solenoid coil is available in all listed voltages and solenoid types.
Materials
| Seals |
Nitrile, Fluoroelastomer (Viton) |
| Internal Wetted |
Stainless Steel |
| Components |
(300 and 400 Series)
PVC and elastomer
type |
| Port Size |
1 inch NPT female, inlet and outlet |
| Fluid Temperatures |
Maximum to 120°F |
Electrical
| Solenoid Voltage |
AC 50/60 Hz-12, 24, 120 or 240 volts DC-6, 12, or 24 volts Available in series 100 through 500 series solenoid
coil designs |
Power
Consumption |
AC-5 watts, DC-6 watts |
| Coil Construction |
Standard Class A (105°C)
Call for special needs |
 |
To Solenoid Main Page